WeiKerui Cable WeiKerui Cable

Global Search

CN- EN

Analysis of the real difference between national standard cables and non-standard cables

Release Time:

Jun 02,2023

A sensitive topic that cable practitioners are familiar with in recent years: it is too difficult to sell national standard cables. Practitioners in the market are really helpless

A sensitive topic that cable practitioners are familiar with in recent years: it is too difficult to sell national standard cables. Practitioners in the market are really helpless;

What is the real difference between national standard cables and non-standard cables? You can learn more about them from the following points:

1. Calculate the cost by the weight of copper. It was effective at the beginning, but the national standard ignored a problem. Your copper is an oxygen-free rod, but the non-standard one is not. When the weight of the scrap copper and the oxygen-free rod are the same, the price of the scrap copper and the oxygen-free rod differ by 10. %. Therefore, the national standard cable has made great efforts to promote it, but it has failed. The difference between the national standard and non-standard guarantees is 10%.

2. Cut corners on accessories. The country has increased resistance inspections, and at the same time increased inspections for conventional products. Non-standard cables have begun to work hard on auxiliary materials. If copper accounts for 70% of the cost of cables, then the cost of auxiliary materials accounts for about 20%. 20% of the cost, if the materials are slightly inferior, the price will be 5% lower than the national standard. You have also seen that many cables that have been exposed recently have problems with accessories.

3. Wire short meter to cable short meter. In fact, the matter of short rice has always existed, and this is the most difficult to investigate. In the past, it often existed on BV, such as 95-meter lines, 98-meter lines, or 90-meter lines. Now because of the increase in inspection items, all products inspected have been included, so non-standard products have begun to work hard in this direction. I hope everyone will pay attention to it. If 100 meters is reduced by 1 meter, 1% of the profit will come out.

4. Thick on both sides and thin in the middle. That is to say, the cables at both ends are national standard, and the middle part is non-standard, so a lot of cost is saved, and the price of the corresponding cable will be much lower. You can't cut the detection cable from the middle, so the leak is drilled like this.

At present, the most worrying thing is the fourth one. As long as the user unit and the cable manufacturer conceal it together, there is no way to investigate it. Is it necessary to dig the cable out of the ground for measurement? This is also the reason why the same is said to be "national standard", but the price is so different.

PRE

In recent years, the types of cables that have been in high demand in the market

What is the difference between flame retardant cable and fire resistant cable?

NEXT

PRE：

In recent years, the types of cables that have been in high demand in the market

NEXT：

What is the difference between flame retardant cable and fire resistant cable?

Recommended News

Share To

Back To List